Advantages of the product

The resin has low viscosity and good inkjet stability.

High cleanliness, good droplet continuity when spraying, less flow hanging, and do not block the nozzle.

High strength and fast curing speed.

It is easy to mix sand, and the mixture has good fluidity.

Green environmental protection, low harmful gas emissions.

How to use

Raw sand: 100% furan resin: 1.5-2.3% (accounting for sand weight) Sulfonic acid curing agent: 0.2-0.7% (accounting for sand weight)

Safety matters

1. The curing agent and the resin should be stored separately. It is strictly forbidden to mix the curing agent and the resin directly to prevent explosion.

2. The sulfonic acid curing agent is a medium acid solution, and the operator should wear anti-acid protective products, especially not to splash into the eyes. If the curing agent contact with the skin will cause slight irritation or allergy to the human body, you should choose to rinse with plenty of water or seek medical attention depending on the severity of the condition.

3. Stay away from fire and heat sources when using.

4. Please clean up the nozzle in time after use.